Houses have grounding wires connected to outlets and fixtures, but the house itself is not grounded well to protect it against lightning strikes standard residential construction usually only has a small bar, if any at all, at roof level, with a single thin grounding wire running to the surface, where it is connected to the ground. House wiring ground. He says that the only way to properly fix and ground everything is to do a whole house rewire is he correct? if, theoretically, you have an old house that has no ground whatsoever, can you run a grounding wire from the panel to all of the outlets to fix this? updated we have bx/ac wiring.
house wiring ground
In the 1920s to 1940s, electrical installations took a turn to a more protective wiring scheme—flexible armored cable flex, also known as greenfield, was a welcomed addition to home wiring because the flexible metal walls helped to protect the wires from damage, and also offered a metal pathway that could ground the system when properly installed. In rocky areas, where it is difficult to drive a ground rod 8 feet down, a grounding plate may be used. this thick piece of metal is buried underneath a footing or foundation. or a ground wire may connect to a metal reinforcing rod embedded in a house's concrete foundation.. So you want to ground wiring in an old house. this is a very easy process that shouldn't take you more than five minutes. locate your outdoor power transformer. locate a nearby water tap. if there isn't one in the vicinity, you will need a metal pole. if this is the case, insert the metal pole in the ground, the deeper the better..
get link reference
